收藏本站
LTM4615
APPLICATIONS INFORMATION
? 4.99k = R TB
R TA =
– TRACK
V FB V FB V
4.99k R FB
R TB
TRACK1isthetrackrampappliedtotheslave’strackpin.
TRACK1 applies the track reference for the slave output up
to the point of the programmed value at which TRACK1
proceeds beyond the 0.8V reference value. The TRACK1
pin must go beyond the 0.8V to ensure the slave output
has reached its final value.
Ratiometric tracking can be achieved by a few simple
calculations and the slew rate value applied to the master’s
TRACK pin. As mentioned above, the TRACK pin has a
control range from 0V to 0.8V. The control ramp slew rate
applied to the master’s TRACK pin is directly equal to the
master’s output slew rate in Volts/Time.
The equation:
MR
SR
where MR is the master’s output slew rate and SR is the
slave’s output slew rate in Volts/Time. When coincident
tracking is desired, then MR and SR are equal, thus R TB
is equal to 4.99k. R TA is derived from equation:
0.8V
+
where V FB is the feedback voltage reference of the regula-
tor, and V TRACK is 0.8V. Since R TB is equal to the 4.99k top
feedback resistor of the slave regulator in equal slew rate
or coincident tracking, then R TA is equal to R FB with V FB =
V TRACK . Therefore R TB = 4.99k and R TA = 10k in Figure 2.
MASTER OUTPUT
SLAVE OUTPUT
Figure 3 shows the output voltage tracking waveform for
coincident tracking.
In ratiometric tracking, a different slew rate maybe desired
for the slave regulator. R TB can be solved for when SR is
slower than MR. Make sure that the slave supply slew
rate is chosen to be fast enough so that the slave output
voltage will reach it final value before the master output.
For example, MR = 2.5V/ms and SR = 1.8V/1ms. Then
R TB = 6.98k. Solve for R TA to equal to 3.24k. The master
output must be greater than the slave output for the
tracking to work. Output load current must be present
for tracking to operate properly during power-down.
Power Good
PGOOD1 and PGOOD2 are open-drain pins that can be
used to monitor valid output voltage regulation. These
pins monitor a ±7.5% window around the regulation point.
If the output is disabled, the respective pin will go low.
COMP Pin
This pin is the external compensation pin. The module
has already been internally compensated for all output
voltages. Table 4 is provided for most application require-
ments. The LTpowerCAD Design Tool is provided for other
control loop optimization. The COMP pins must be tied
together in parallel operation.
Parallel Switching Regulator Operation
The LTM4615 switching regulators are inherently current
mode control. Paralleling will have very good current shar-
ing. This will balance the thermals on the design. Figure
13 shows a schematic of a parallel design. The voltage
feedback equation changes with the variable N as chan-
nels are paralleled.
The equation:
+ R FB
V OUT
= 0.8V ?
4.99k
N
R FB
TIME
4615 F03
N is the number of paralleled channels.
Figure 3. Output Voltage Coincident Tracking
13
For more information www.linear.com/LTM4615
4615fb
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
LTM4618IV#PBF IC DC-DC UMODULE BUCK 6A 84-LGA
LTM4619IV#PBF IC SWIT REG BUCK 4A ADJ 144LGA
LTM4627MPY#PBF IC DC/DC UMODULE 15A 133-BGA
LTM4628EV#PBF IC DC/DC UMODULE 16A 144-LGA
LTM8008HV#PBF IC DC/DC UMODULE 16-LGA
LTM8020IV#PBF IC DC/DC UMODULE 200MA 21-LGA
LTM8023MPV#PBF IC BUCK SYNC ADJ 2A 50LGA
LTM8025MPV#PBF IC CONVERTER BUCK 3A ADJ 70LGA
相关代理商/技术参数
LTM4615IVPBF 制造商:Linear Technology 功能描述:Conv DC-DC Triple Step-Down 5.5V LGA144
LTM4616 制造商:LINER 制造商全称:Linear Technology 功能描述:Low VIN, 8A DC/DC μModule Regulator
LTM4616_12 制造商:LINER 制造商全称:Linear Technology 功能描述:Dual 8A per Channel Low VIN DC/DC μModule Regulator
LTM4616EV#PBF 功能描述:IC DC/DC UMODULE DUAL 8A 144-LGA RoHS:是 类别:电源 - 板载 >> DC DC Converters 系列:µModule® 设计资源:VI-200, VI-J00 Design Guide, Appl Manual 标准包装:1 系列:* 类型:隔离 输出数:1 电压 - 输入（最小）:66V 电压 - 输入（最大）:160V Voltage - Output 1:12V Voltage - Output 2:- Voltage - Output 3:- 电流 - 输出（最大）:* 电源（瓦） - 制造商系列:50W 电压 - 隔离:* 特点:* 安装类型:通孔 封装/外壳:9-FinMod 尺寸/尺寸:4.60" L x 1.86" W x 0.79" H（116.8mm x 47.2mm x 20.1mm） 包装:散装 工作温度:-25°C ~ 85°C 效率:* 电源（瓦特）- 最大:*
LTM4616EV#PBF 制造商:Linear Technology 功能描述:DC/DC Controller LTC
LTM4616EVPBF 制造商:Linear Technology 功能描述:Conv DC-DC Dual-Out Step Down
LTM4616EV-PBF 制造商:LINER 制造商全称:Linear Technology 功能描述:Dual 8A per Channel Low VIN DC/DC μModule
LTM4616EY#PBF 功能描述:IC DC/DC UMODULE 0.6-5V 144BGA RoHS:是 类别:电源 - 板载 >> DC DC Converters 系列:µModule® 设计资源:VI-200, VI-J00 Design Guide, Appl Manual 标准包装:1 系列:* 类型:隔离 输出数:1 电压 - 输入（最小）:66V 电压 - 输入（最大）:160V Voltage - Output 1:12V Voltage - Output 2:- Voltage - Output 3:- 电流 - 输出（最大）:* 电源（瓦） - 制造商系列:50W 电压 - 隔离:* 特点:* 安装类型:通孔 封装/外壳:9-FinMod 尺寸/尺寸:4.60" L x 1.86" W x 0.79" H（116.8mm x 47.2mm x 20.1mm） 包装:散装 工作温度:-25°C ~ 85°C 效率:* 电源（瓦特）- 最大:*